Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Battery

Replacing the battery in the Mazda CX-5 is very simple, let's see how to proceed in this tutorial. For this operation we only need a 10mm wrench. We start by loosening the upper nuts of the battery fixing bracket, then we press and rotate the long rods as shown in the video, in order to unclip the lower part. Once the bracket has been removed, we continue by disconnecting the two poles starting from the negative one, it is sufficient to loosen the fixing nut. Finally, we extract the battery, insert the spare and reassemble everything following the reverse procedure.

Posted on 21 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the battery of the Mazda CX-5?
How do i replace the battery of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) The Mazda CX-5 battery is located inside the engine compartment, in the center immediately below the windshield. In order to reach it, it will theref…
How to replace the Mazda CX-5 battery
How to replace the Mazda CX-5 battery
Mazda CX-5 (2017-2024 / MK 2) Let's see today how to replace the Mazda CX-5 service battery. Open the front hood and identify the position of the battery (near the drainage channe…
How do you replace the battery of the Mazda CX-5 remote control?
How do you replace the battery of the Mazda CX-5 remote control?
Mazda CX-5 (2017-2024 / MK 2) In order to replace the battery of the Mazda CX-5 remote control, you need to pry off the back cover of the remote control: once removed, you can pry…

How to Replace the Front Bumper of an Opel Corsa

The process is straightforward and quick; just follow this simple guide. Start by unscrewing the screws located under the wheel arch, specifically those facing the front bumper, on both sides. Next, remove the screws securing the bumper to the lower panel of your vehicle. Lift the bonnet and remove the screws located on the top of the bumper. Once these screws are removed, you can easily pull out the bumper and disconnect the plugs at the back.

Watch the video!


by ScegliAuto

More videos