Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the TPMS warning light for the Mazda CX-5.

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part:

Below we will see the instructions on how to reset the TPMS light of the Mazda CX-5. Before resetting the pressure sensors, it is necessary that all four tires are at the correct operating pressure. So, let's get in the car and start by turning on the instrument panel; then we press and hold the reset button located on the dashboard, next to the steering wheel, until the TPMS light is completely reset on the instrument panel, as shown in the video. Turn off the instrument panel by starting the engine and checking that the reset has been successful!

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the 2019 Mazda CX 5
How to reset the TPMS light on the 2019 Mazda CX 5
Mazda CX-5 (2017-2024 / MK 2) The TPMS warning light, related to tire pressure, should be reset only after checking the tire pressure. To reset the TPMS warning light on a 2019 Ma…
How to reset the TPMS light on the 2019 Mazda CX-5
How to reset the TPMS light on the 2019 Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today we will explain how to reset the tire pressure warning light on a 2019 Mazda CX 5 vehicle. To reset the warning light, we need to press the INF…
Guide to resetting the tire pressure warning light on the Mazda CX-5
Guide to resetting the tire pressure warning light on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today's main information will show us how to reset the tire pressure monitoring system (TPMS) light on the Mazda CX-5; before performing the reset, i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos