Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light on the Mazda CX-5

Model: Mazda CX-5 KE, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will discover the information that will show us how to reset the tire pressure warning of the Mazda CX-5; before resetting the TPMS sensors, it is necessary that all four tires are at the operating pressure. Then, we get on board the car and start the instrument panel; then we press and hold the TPMS reset button located on the side of the dashboard, until the light on the instrument panel is reset, as shown in the video.

All that's left to do is start the engine!


Posted on 17 November 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to reset the tyre warning light in the Mazda CX-5?
How to reset the tyre warning light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / KE, MK 1) In this tutorial, you will see how to reset the tyre warning light in the Mazda CX-5, an extremely simple and quick operation to perform only after r…
How to reset the tyre warning light on the Mazda CX-5?
How to reset the tyre warning light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / KE, MK 1) In this tutorial, you will learn how to reset the tyre warning light on the Mazda CX-5. This operation is extremely simple and quick, and should only…

Other guides you may be interested in

How to Reset the EDC Light on a Mercedes Sprinter?

When the EDC light appears on the instrument cluster of a Mercedes Sprinter, it indicates a generic malfunction in the vehicle's injection system. To identify the source of the problem, a diagnosis must be performed at a workshop. This will help identify the damaged component, which will need to be replaced or repaired. Once the issue has been physically addressed, connect a diagnostic tool to the vehicle's OBD port located under the steering column. This will allow you to clear the errors in the ECU, turning off the EDC light.

Watch the video!


by ScegliAuto

More videos