Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Reset Tyre Pressure Light on Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

In today's video tutorial, you will see the instructions to reset the tyre pressure light on a Mazda CX-5. Before performing this operation, ensure that any issues related to the pressure change in one or more tyres that caused the warning light to activate have been resolved.

Once the problem is fixed, get inside the car and switch on the ignition: then press the "set" button located to the left of the steering wheel and hold it until the warning light flashes and then goes out; switch off the ignition and turn it back on to verify the result!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light in the Mazda CX-5
How to Reset the Tyre Pressure Light in the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In this guide, you will discover the instructions that will allow you to reset the tyre pressure light in the Mazda CX-5; before performing the reset…
Guide to Resetting the Tyre Pressure Warning Light on a Mazda CX-5
Guide to Resetting the Tyre Pressure Warning Light on a Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today's main information will show you how to reset the tyre pressure warning light (TPMS) on a Mazda CX-5; before performing the reset, ensure that …
Resetting the tire pressure warning on the Mazda CX-5.
Resetting the tire pressure warning on the Mazda CX-5.
Mazda CX-5 (2012-2017 / MK 1, KE) The procedure outlined in this guide will show us how to reset the tire pressure warning on the Mazda CX-5; before resetting the TPMS sensors, it is …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos