Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How to replace the Mazda CX-5 battery

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 2 - Years 2017-2023
Part: Battery
Operation: How to replace the Mazda CX-5 battery

Let's see today how to replace the Mazda CX-5 service battery. Open the front hood and identify the position of the battery (near the drainage channel between the windscreen and the engine compartment). First disconnect the negative (black) and then the positive (red) pole. Now remove the locks, using a wrench, and extract the battery from its seat. Install the new battery (of the same type) and reconnect everything, following the previous instructions. Now get into the car and start it; configure the various on-board services (radio, start & stop, tpms, etc.) and you are done.


Posted on 14 April 2024 by ScegliAuto



How do you replace the battery in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) Replacing the battery of the Mazda CX-5 is done by opening the hood and locating the battery on the right side of the engine compartment, just below
How do i replace the battery of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) .. The Mazda CX-5 battery is located inside the engine compartment, in the center immediately below the windshield. In..
How do i replace the battery of the Mazda CX-5?
Mazda CX-5 (2017-2023 / MK 2) .. The replacement of the Mazda CX-5 battery is done by opening the hood in order to have access to the engine compartment: the battery..

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos