Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Cabin air filter

As shown in this tutorial, replacing the cabin filter in the Mazda 6 is an extremely simple and quick operation. First, sit in the passenger seat, then open the glove compartment, empty it, and detach the damper on the right side. Next, grasp both sides of the drawer, press them inward, and remove it from the dashboard. At this point, you can open the long rectangular cover, extract the old filter, and clean the inside of the housing from any residue. Finally, insert the replacement in the correct orientation.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter of the Mazda 6 2018
How to replace the cabin filter of the Mazda 6 2018
Mazda 6 (2012-2024 / GJ, MK 3) If you want to replace the air filter inside the cabin of your Mazda 6 (2018), you just need to follow the steps described in this new mini guide ded…
How to Replace the Diesel Filter on a Mazda 6
How to Replace the Diesel Filter on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Remove the diesel filter on a Mazda 6. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard…
How to remove the fuel filter on a Mazda 6.
How to remove the fuel filter on a Mazda 6.
Mazda 6 (2008-2012 / GH, MK 2) In this video, we will see how to remove the fuel pump filter on a Mazda 6: this filter is located under the back seat, behind the driver (left-hand …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos