Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Mazda 5 2008

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Air filter

In this new guide of ours dedicated to all of you owners of a 2008 Mazda 5, we will describe step by step all the various steps necessary to be able to complete the replacement of the engine air filter in a completely independent and safe way. So first turn off the car completely and lift the front hood. At this point, locate the filter box in the lower right part of the engine compartment and proceed with the removal of the protective cover present. Finally, you just have to remove the old filter and replace it with the new one.

Posted on 26 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Mazda 5
How to replace the cabin air filter of the Mazda 5
Mazda 5 (2005-2015 / MK 1) Today we will explain how to replace the cabin air filter on a Mazda 5 vehicle. To replace the air filter, we must remove the bottom of the passenger…
How to replace the cabin filter on a Mazda 5.
How to replace the cabin filter on a Mazda 5.
Mazda 5 (2005-2015 / MK 1) In this video tutorial we can see how it is possible to replace the cabin filter on a Mazda 5, following a few simple steps that will guide you towar…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Mazda 5 (2005-2015 / MK 1) The cabin air filter is located behind the centre tunnel: access it from the passenger side and remove the plastic side cover and the sound-absorbing…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos