Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 5
    4. : How to replace the cabin filter on a Mazda 5.

Mazda 5 - Video tutorial

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Cabin air filter
Operation: How to replace the cabin filter on a Mazda 5.

In this video tutorial we can see how it is possible to replace the cabin filter on a Mazda 5, following a few simple steps that will guide you towards proper management of your vehicle. First, we need to purchase a new pollen filter; the next step is to get into the car and turn off the engine, pull the handbrake. The cabin filter is located inside the vehicle behind the glove compartment; open the glove compartment and remove the material inside; the next step is to release the two fixing elements that hold it in place. Release the two screws and move the fuse box to the right, finally we need to unscrew the 4 screws and remove the filter housing. Replace the old filter with a new one and position it according to the arrows that follow the airflow.


Posted on 19 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos