Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Mazda 5

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Cabin air filter

Today we will explain how to replace the cabin air filter on a Mazda 5 vehicle. To replace the air filter, we must remove the bottom of the passenger side glove compartment, after removing the bottom we must remove the side of the lower dashboard. Using a Phillips screwdriver, unscrew the screws on the filter cover and disconnect the connector. We then open the box cover to remove the filter; on this type of vehicle the filter is composed of two parts. Insert the first filter and then the second to close the cover and tighten the screws. Connect the connector and mount the lower side of the dashboard. Mount the bottom of the glove compartment to complete the replacement operation.

Posted on 20 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a 2008 Mazda 5
How to Replace the Air Filter on a 2008 Mazda 5
Mazda 5 (2005-2015 / MK 1) In this guide for all 2008 Mazda 5 owners, you will find step-by-step instructions to independently and safely replace the engine air filter. First, …
How to Replace the Cabin Filter on a Mazda 5
How to Replace the Cabin Filter on a Mazda 5
Mazda 5 (2005-2015 / MK 1) In this video tutorial, see how to replace the cabin filter on a Mazda 5 by following a few simple steps for proper vehicle maintenance. First, purch…
Replacing Engine Oil and Oil Filter
Replacing Engine Oil and Oil Filter
Mazda 5 (2005-2015 / MK 1) To replace the engine oil and the corresponding filter, position the vehicle on suitable car ramps to facilitate access to the oil sump; unscrew the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos