Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of External Rear-View Mirror

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

Video tutorial

To remove the external rear-view mirror, first remove the door panel as the electric adjustment cable for the mirror passes through the panel to reach the switch near the handle. Proceed by removing the panel, taking out the caps inside the handle and the opening lever to unscrew the mounting screws and release the pressure clips along the edges.

At this point, disconnect the mirror cable, remove the plastic cover behind the mirror, and unscrew the relevant mounting bolts to complete the removal.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Dismantling Climate Control Controls
Dismantling Climate Control Controls
Mazda Cx 7 (2006-2012 / MK 1) If you need to dismantle the climate control controls, first unclip the trim that covers the centre console and houses the air vents; once the trim i…
Instructions for Removing the Rear Light
Instructions for Removing the Rear Light
Mazda Cx 7 (2006-2012 / MK 1) Removing the rear light on this car model is quite simple: once the rear bonnet is open, locate the cap on the internal trim of the boot, positioned …
Removing the Internal Door Handle
Removing the Internal Door Handle
Mazda Cx 7 (2006-2012 / MK 1) To remove the internal door handle, you must first take off the door trim panel: there are only two fixing screws, one inside the handle housing whic…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos