Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Cabin air filter replacement

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Cabin air filter
Operation: Cabin air filter replacement

The cabin air filter (this model of car actually has two supplied) is located immediately behind the central tunnel but its seat can be accessed from the passenger side; then remove the plastic covering placed on the side of the central tunnel on the passenger side to access the seat of the air conveyor, unscrew the six fixing screws of the filter container cover and then remove it and extract the two cabin air filters; make sure that there are no residues of dirt inside the filter housing and insert the new ones (choose those with activated carbon if available) and then refit the cap and lining.


Posted on 1 September 2023 by ScegliAuto



How to change the cabin air filter
Mazda 3 (2009-2013 / MK 2, BL) The cabin filter serves to ensure good air quality inside the cabin, protects against pollen and particles and is effective against unpleasant odors.
How to change the cabin air filter of a Mazda 3 2007.
Mazda 3 (2003-2009 / BK, MK 1) Fortunately, replacing the cabin air filter in your 2007 Mazda 3 is one of the simplest operations to perform, even on your own, and thanks to the fo
How to replace the cabin air filter of the Mazda 3.
Mazda 3 (2013-2019 / MK 3, BN, BM) Below we will see the instructions that will allow us to disassemble and replace the cabin air filter of the Mazda 3, in simple and quick steps. Firs

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos