Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Replacement of the instrument cluster on the Mazda CX-7 dashboard.

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Instrument cluster
Operation: Replacement of the instrument cluster on the Mazda CX-7 dashboard.

Below we will see the steps that will allow us to disassemble and replace the instrument panel of the Mazda CX-7 dashboard. First, we get inside the car and start by removing the plastic cover located under the instrument panel, next to the steering wheel. Then, we remove the partition located above the instrument panel, by unscrewing all the fixing screws found on the sides (using a cross-head screwdriver), as shown in the video. At this point, we disconnect the electrical connector located behind the instrument panel in order to remove it. Let's replace it with the new one!


Posted on 3 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Cx 7 2006-2012 - What to do if the Mazda CX 7 SCR warning light comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos