Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear suspension of the Mazda CX-7

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Suspension system

This video is currently unavailable

Below are the main instructions for removing and replacing the rear suspension of the Mazda CX-7. First, lift the vehicle and remove the rear wheels; then, unscrew the lower suspension bolt, disconnecting it from the arm, as shown in the video. Next, open the bonnet and remove the side plastic cap to access the top of the suspension; then, unscrew the upper nut to remove and replace the rear suspension with the new one, applying the reverse procedure for reassembly!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel of the Mazda CX-7
Removing the Rear Door Panel of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) This guide outlines the steps to remove the rear door panel of the Mazda CX-7. First, open the rear door of the vehicle and start unscrewing the fast…
How to Reset the AdBlue Warning Light on the Mazda CX-7?
How to Reset the AdBlue Warning Light on the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) To reset the AdBlue warning light that appears on the instrument cluster of the Mazda CX-7, you need to top up by adding the necessary amount of addi…
How to reset the AdBlue warning light on the Mazda CX-7?
How to reset the AdBlue warning light on the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) To reset the AdBlue warning light on the Mazda CX-7, top up the necessary amount of additive liquid in the respective tank: this is located at the re…

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos