Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light bulbs of the Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Tail light bulb

In this video, we will see what to do if one of the bulbs in the rear light burns out; we will see how to proceed with the replacement. Open the boot lid, stand in front of the light containing the bulb to be changed, and release the clip that secures the carpet covering behind the light with the appropriate tool to gain access to the bulbs for the indicator and position and brake lights, which can be removed by slightly rotating them for replacement. If the bulb to be replaced is the one mounted on the boot lid, also remove the clip that secures the covering here, disconnect the connector, and by rotating it, remove the bulb holder from its housing.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light
Replacing the Rear Light
Mazda 3 (2003-2009 / BK, MK 1) Open the boot lid and locate the rear of the light that needs replacing. You will need to remove the hard panel around the boot lid by simply unscrew…
How to Replace the Front Headlamp Bulbs on a Mazda 3
How to Replace the Front Headlamp Bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboa…
Replacement of the rear taillight of the Mazda 3
Replacement of the rear taillight of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Today we will discover the instructions that will allow us to disassemble and replace the rear tail light and its bulbs of the Mazda 3. First of all,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos