Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Replacement for Pump Protection

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Pump

In some technical issues, the solution is simpler than expected; in this case, we will check the pump fuse. Look for a diagram online that indicates which fuse protects the pump. Now, lift the bonnet and disconnect the battery to protect all circuits. On the right side, there is a panel that, when lifted, will show the position of each fuse. Remove it with pliers. Also, check the relevant relay. Now you can replace the necessary parts, close the fuse compartment with the panel, and you're done.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Fuel Pump Location
Check Fuel Pump Location
Mazda Cx 7 (2006-2012 / MK 1) The fuel pump is located under the rear seat, behind the driver: to access it, first remove the rear seat by levering underneath the central area of …
What is the stop fuse in the Mazda CX-7?
What is the stop fuse in the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) If the stops of our Mazda CX-7 have suddenly stopped working and the respective bulbs are intact, we can first of all check the status of the corresp…
How to reset the AdBlue warning light on a Mazda CX7
How to reset the AdBlue warning light on a Mazda CX7
Mazda Cx 7 (2006-2012 / MK 1) To reset the SCR warning light (which corresponds to the AdBlue warning light), after actually filling the car with the required additive, get into t…

Other guides you may be interested in

Replacing Cabin Filter on Renault Modus

Replace the cabin filter on a Renault Modus. Open the door and remove the glove compartment from the dashboard on the right side. Use a plastic lever to detach the cover located under the dashboard. Unscrew the securing screws around the perimeter of the glove compartment with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Extract the cabin filter from its housing, insert the new filter into the holder, and reassemble all components of the glove compartment as they were disassembled.

Watch the video!


by ScegliAuto

More videos