Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Check the location of the fuel pump

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Pump
Operation: Check the location of the fuel pump

The fuel pump is located under the seat of the rear seat, behind the driver: in order to reach it, it is first of all necessary to remove the seat of the rear seat by levering under the central area of the seat itself, on both sides; once the seat has been removed, there is a metal plate with a rubber grommet: then unscrew the fixing screws of the plate in order to reach the pump seat by disconnecting the relative power socket; if it is also necessary to disassemble it, disconnect the pipes and unscrew the screws of the fixing flange.


Posted on 27 August 2023 by ScegliAuto



Pump protection fuse replacement
Mazda Cx 7 (2006-2012 / MK 1) In some technical problems the solution is simpler than expected, in this case we will check the pump fuse. Also look for a diagram on the internet t
Car fuel line replacement
Mazda Cx 7 (2006-2012 / MK 1) The following guide gives instructions on how to replace the fuel line in the car. Disconnect the negative terminal of the battery, this to avoid spa
Replacing the diesel pump on Mazda Cx 7
Mazda Cx 7 (2006-2012 / MK 1) On this model of car, the tutorial starts with the intercooler removed from the vehicle and set aside (to remove it, simply unscrew the three nuts an

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos