Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Rear seat replacement.

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Seat
Operation: Rear seat replacement.

First of all, it is necessary to identify the position of the springs, under the seats, which fit the seats into position. Insert a sturdy screwdriver under the seat, in correspondence with the springs, and pry to disengage the seat. Once the seat has been disengaged, it can be removed for cleaning or to replace it with a new one. In case of replacement, place the seat in position, remember to move the locks of the seat belts above the seat itself and to match the U-irons in correspondence with the springs. Once positioned, just push down on the springs until you hear the click of the joint. The car is a Mazda CX-7.


Posted on 4 September 2023 by ScegliAuto



Check the location of the fuel pump
Mazda Cx 7 (2006-2012 / MK 1) The fuel pump is located under the seat of the rear seat, behind the driver: in order to reach it, it is first of all necessary to remove the seat of
Removing the rear bumper
Mazda Cx 7 (2006-2012 / MK 1) Removing the rear bumper is quite simple but you must first remove other elements such as the rear lights in order to access some of the fastening cl
Rear light disassembly instructions
Mazda Cx 7 (2006-2012 / MK 1) The removal of the rear light on this model of car is quite simple to carry out: once the rear hood has been opened, intercept the cap on the inner l

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos