Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx 7
  6. : Guide to replacing the rear headlight bulbs of the Mazda CX-7.

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Rear light bulb
Operation: Guide to replacing the rear headlight bulbs of the Mazda CX-7.

In this short and simple guide, we will see how to disassemble and replace the rear light and its bulbs of the Mazda CX-7. First, we open the rear hatch of the trunk and start removing the plastic cover we find on the sides; then we unscrew the fixing screw of the light, removing it from the outside, as shown in the video. At this point, we disconnect the electrical connectors, removing and replacing any non-functioning bulbs; we then reassemble the lights and the rear light, making sure we have connected the connectors and verifying the operation of the bulbs!


Posted on 12 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos