Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Headlamp Bulbs

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

Video tutorial

Replacing the rear headlamp bulbs is very simple as it is not necessary to remove the headlamp; you can access the bulb holder from the boot by removing a protective grille located just behind the headlamp housing; once the grille is removed, you can access the headlamp and unclip the bulb holders to check the condition of the bulbs: even if they are functioning, if they appear blackened, it is recommended to replace them anyway; once the inspection and any bulb replacement is complete, reposition the grille, ensuring it clips back in correctly.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Mazda Cx 7 (2006-2012 / MK 1) In this brief and simple guide, learn how to remove and replace the rear light and its bulbs on the Mazda CX-7. First, open the rear hatch of the boo…
Mazda Cx 7 (2006-2012 / MK 1) These brief and simple instructions will guide you through the process of removing and replacing the rear light bulbs on a Mazda CX-7. First, open th…
Mazda Cx 7 (2006-2012 / MK 1) To replace the brake bulb in the rear light, you do not need to remove the light unit as you can access the back of the light by opening the boot. Re…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos