Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Mazda CX-7?

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Light bulb

To replace the front headlamp bulb on the Mazda CX-7, remove the rivets located inside the wheel arch corresponding to the headlamp that needs the bulb replaced. By unfastening the rivets, you can move the cover of the inner wheel arch and access the bulb. Here, you can disconnect the connector and remove the bulb from its housing. Once the old bulb is removed, connect the new one to the connector and insert it back into its housing. After the replacement, reattach the wheel arch.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Mazda CX-7
How to replace the headlight bulb of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) The following instructions will allow us to disassemble and replace the headlight bulb of the Mazda CX-7. To access the low beam bulb, it is necessar…
How to replace the rear taillight bulbs of the Mazda CX-7
How to replace the rear taillight bulbs of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) These short and simple instructions will guide us through the process of disassembling and replacing the rear light bulbs of the Mazda CX-7. First, w…
Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
Mazda Cx 7 (2006-2012 / MK 1) To remove the front headlight, you must first remove the bumper as the headlight is positioned underneath it; open the front bonnet and start by remo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos