Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the stop fuse in the Mazda CX-7?

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Tail light bulb

If the stops of our Mazda CX-7 have suddenly stopped working and the respective bulbs are intact, we can first of all check the status of the corresponding fuse, the position of which is indicated in this video. The fuse in question is located in the box inside the engine compartment, protected by the black plastic cover next to the battery. It is a 10A fuse and is the second in the first column of the lower fuse group, looking at the box from the front. If it is faulty, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse Replacement for Pump Protection
Fuse Replacement for Pump Protection
Mazda Cx 7 (2006-2012 / MK 1) In some technical issues, the solution is simpler than expected; in this case, we will check the pump fuse. Look for a diagram online that indicates …
Where is the Windscreen Wiper Fuse Located on the Mazda CX-7?
Where is the Windscreen Wiper Fuse Located on the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) The windscreen wiper fuse of the Mazda CX-7 is located in the fuse box inside the cabin: this box can be found on the inner part of the dashboard. To…
How to adjust the handbrake of the Mazda CX 7
How to adjust the handbrake of the Mazda CX 7
Mazda Cx 7 (2006-2012 / MK 1) Adjusting the handbrake of the Mazda CX 7 independently is a rather simple and quick operation. To perform the operation, we need to open the central…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos