Do it yourself
| ||||
|
Mazda 3 - Video tutorial
Model: Mazda 3
BK, MK 1
- Years 2003-2009 Do you want to lift the machine on the bridge and do not know how to position the arms? In this video we will show you. To lift the machine on the bridge you must initially position it in the center of the two columns of the bridge. Let's now move on to the arms. Pull out the front arms and place them behind their respective wheels. There is a kind of track where the teeth of the bridge grommets fit together. Be careful to place both arms in the same point to avoid unpleasant inconveniences. Now switch to the rear arms. They too, like the front arms, must be placed on their respective tracks. With the difference that the rear wheels must be placed in front. Also in this case be careful how you position the arms otherwise the support loses stability.
Posted on 21 September 2023 by ScegliAuto
How to replace an engine oil filter on Mazda Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) How to replace the engine oil filter on Mazda Mazda 3? Let's see how to proceed in replacing the pieces. We lift the car with a column bridge and put
How to change the fuel filter on Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Let's see how to remove and replace the fuel filter on Mazda 3. We lift the car on a column bridge (jack), we identify the fuel filter near the rear
How to remove the external temperature sensor on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) We see in this video how to remove the external temperature sensor on a Mazda 3. We lift the car on a column bridge and remove the rim, to remove the Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |