Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Mazda CX-3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Side mirror

Today's step-by-step instructions will show us how to disassemble and replace (or repair) the external rearview mirror of the Mazda CX-3. First, we open the front door and start disassembling and removing the door panel, unscrewing all the fastening screws; then we unscrew the screws of the external rearview mirror, disconnecting the electrical wiring to remove it from the outside, as shown in the video. At this point, we replace and install the new external rearview mirror, securing it properly and finally adjusting the glass!

Posted on 27 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Wing Mirror on the Mazda CX-3
How to Remove the External Wing Mirror on the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) In this guide, learn how to remove and replace the external wing mirror on the Mazda CX-3. First, open the front door and start by removing the plast…
How to Replace the External Rear View Mirror on Mazda CX-3
How to Replace the External Rear View Mirror on Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) To replace the external rear view mirror on the Mazda CX-3, you need to remove the inner door panel by disconnecting the electrical connectors (for t…
How to replace the rearview mirror of the Mazda CX3
How to replace the rearview mirror of the Mazda CX3
Mazda Cx 3 (2015-2023 / MK 1) When the external rearview mirror of the Mazda CX 3 stops opening, it may be necessary to replace it. To replace the mirror, we remove the left door …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos