Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rearview mirror of the Mazda CX3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Side mirror

When the external rearview mirror of the Mazda CX 3 stops opening, it may be necessary to replace it. To replace the mirror, we remove the left door of the car and then remove the panel. To remove the panel, it is necessary to unscrew the bottom and top screws, and then remove the handle and armrest to unscrew the two central screws. Disconnect the connector of the mirror and the window lifter. Unscrew the screws that support the mirror and remove it. Insert the new mirror and connect it to the connector, screw in the screws, and reassemble the cover.

Posted on 4 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to repair the rearview mirror of the Mazda CX3?
How to repair the rearview mirror of the Mazda CX3?
Mazda Cx 3 (2015-2023 / MK 1) As the title of the video guide itself says, an external electric rearview mirror can present various problems, such as noise, inability to open and …
How to Replace the External Rear View Mirror on Mazda CX-3
How to Replace the External Rear View Mirror on Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) To replace the external rear view mirror on the Mazda CX-3, you need to remove the inner door panel by disconnecting the electrical connectors (for t…
How to disassemble the external rearview mirror of the Mazda CX-3
How to disassemble the external rearview mirror of the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) Today's step-by-step instructions will show us how to disassemble and replace (or repair) the external rearview mirror of the Mazda CX-3. First, we o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos