Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external door handle on the Mazda CX-3?

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Handle

In this tutorial, we will see how to disassemble the external door handle of the Mazda CX-3, a very simple and quick operation. First, we open the door we will be working on, then we locate the black plastic cap on the inner edge, at the height of the lock, and remove it using a flathead screwdriver. Next, we unscrew the bolt that has just been exposed using a long Torx T25 wrench, extract the lock cylinder, and remove the handle by pushing it towards the rear of the car. To install a replacement, simply follow the reverse procedure.

Posted on 8 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats in the Mazda CX-3?
How to remove the rear seats in the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) In this tutorial, we can see how to remove the rear seats in the Mazda CX-3, an extremely simple and fast operation. First of all, we open both rear …
How to open the fuel door on the Mazda CX-3?
How to open the fuel door on the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) In this tutorial, we can see how to open the fuel cap on the Mazda CX-3, an extremely simple operation that does not differ from the typical procedur…
How to Replace the Battery on a Mazda CX-3?
How to Replace the Battery on a Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) To replace the battery on a Mazda CX-3, open the bonnet to access the components inside the engine bay: on the right side, you will find the battery,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos