Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Tyre Pressure on the Mazda 5

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Handle

Let's see how to check the tyre pressure on a Mazda 5. You will need a digital pressure gauge like the one available on AliExpress with code 1005005906508747 at a price of £14.07, with free delivery in 7/10 days, and an air pump. First, find the reference pressure values, which are not those indicated on the tyre, but those shown on the driver's door pillar, indicated in PSI (the measure used in Anglo-Saxon countries) and in Bar (the measure used in EU countries). The measurement should be done on cold tyres: remove the cap from the valve, press the gauge onto the valve, read the value on the display, and repeat for all four tyres. Adjust the pressure by inflating if it is too low, and releasing air if it is too high. Replace all the caps. The TPMS warning light will turn off automatically after a few miles of driving.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for the Mazda 5?
How do you program the key for the Mazda 5?
Mazda 5 (2005-2015 / MK 1) To program the key of the Mazda 5, you need to insert the blank key into the corresponding slot, in order to turn on the ignition. Once this is done,…
What is the Fuse Diagram for the Mazda 5?
What is the Fuse Diagram for the Mazda 5?
Mazda 5 (2005-2015 / MK 1) In this video, you can see the diagrams of the fuse boxes, along with their locations, in the Mazda 5, to consult in case a device is malfunctioning …
How to Reset the Service Light on a Mazda 5
How to Reset the Service Light on a Mazda 5
Mazda 5 (2005-2015 / MK 1) In this tutorial, you will learn how to reset the service light on a Mazda 5. Before performing this simple and quick operation, ensure that all main…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos