Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Clk
  6. : Rear bumper

Mercedes Clk - Rear bumper

Mercedes Clk (1997-2003 / W208)
How to remove the rear bumper on Mercedes Clk

Removing the rear bumper of the Mercedes Clk? Let's see how it disassembles. We open the tailgate, remove the cloth lining in the luggage compartment and the …read all…
Posted on 10 December 2023 by ScegliAuto

Airbags (1) Loudspeaker (1) Shock absorbers (1) Air conditioning (1) Car stereo (8) Anti roll bar (1) Battery (4) Coil (1) Air Vents (2) Bushings (1) Arm (2) Gearbox (1) Spark plugs (2) Soft top (8) Bodywork (3) Glove box (3) Control unit (2) Key (2) V-belt (1) Air conditioning (2) Air conditioning controls (2) -board computer (4) Checks and maintenance (20) Dashboard (4) Mass air flow sensor (2) Brake discs (1) Headlight (8) Fog lights (1) Air filter (3) Cabin air filter (3) Diesel filter (1) Oil filter (1) Grille (1) Accessory Kit (7) Xenon headlight kit (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) Handle (1) Engine (4) Window motor (2) Engine oil (1) Power steering oil (1) Door panel (8) Windshield (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Pump (5) Fuel pump (1) Door (2) Push button (1) Window lift button (1) Instrument cluster (9) Radiator (1) Fuse box (7) Seat (7) Parking sensors (1) Lock (1) Suspensions (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (7) Transmission (1) Central tunnel (2) Interior blower (2) Side window (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos