Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Clk
  6. : Brake pads

Mercedes Clk - Brake pads

Brake Pads Mercedes Clk (2002-2010 / a 209, c 209, w 209)

Mercedes Clk (2002-2010 / A209, C209, W209)
Changing Your Car's Brake Pads

Brake pads wear out faster and therefore need to be replaced more often than brake discs. When worn, the pads have a lower contact surface with the disc, …Read all…
Posted on 18 February 2026 by ScegliAuto

Airbag (1) Speaker (1) Shocks (1) Air conditioning (1) Car stereo (8) Anti-roll bar (1) Battery (4) Ignition coil (1) Air vents (2) Bushings (1) Control arm (2) Transmission (2) Spark plugs (3) Convertible top (10) Body (5) Glove compartment (3) Control unit (2) Key (5) V-belt (1) Air conditioner (1) A/C controls (2) Onboard computer (2) Checks and maintenance (19) Dashboard (4) MAF sensor (2) Brake rotors (1) Headlight (8) Fog lights (2) Air filter (3) Cabin air filter (4) Diesel fuel filter (1) Oil filter (1) Grille (1) Accessory kit (7) Xenon headlight kit (2) Light bulb (4) Side marker bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Instrument panel light (1) Handle (1) Engine (4) Power window motor (2) Starter motor (1) Engine oil (3) Power steering fluid (1) Clock (20) Door trim panel (8) Windshield (1) Front bumper (1) Rear bumper (1) Brake pads (1) Shift knob (1) Pump (6) Fuel pump (1) Car door (2) Push button (1) Power window switch (1) Instrument cluster (7) Radiator (1) Fuse box (20) Seat (8) Parking sensors (1) Door lock (2) Suspension system (1) Side mirror (3) Warning light – error code (7) Tire pressure warning light (2) Service warning light (23) Manufacturer emblem (1) Windshield wipers (7) Drivetrain (1) Center console tunnel (3) Blower motor (2) Side window (2)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos