Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on the Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

Each time you check the tire inflation pressure, you must reset the corresponding control system; refer to the table inside the fuel filler cap for the correct tire pressure value. After checking, turn on the ignition, navigate through the menu using the arrows on the left side of the steering wheel until you select the tire pressure monitoring option.

Then, press the trip reset button located below the tachometer to activate the reset. Select 'yes' using the buttons on the right side of the steering wheel, and then press the button below the tachometer again to confirm.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Restoring tire pressure on the Mercedes Class A W169
Restoring tire pressure on the Mercedes Class A W169
Mercedes Classe A (2004-2012 / W169) .. tire pressure control system on the Mercedes A-Class W169: first of all, make sure that the tire pressure is correct and in line with the values recommended.. …
How to Reset the Tire Pressure Warning Light on the Mercedes A-Class
How to Reset the Tire Pressure Warning Light on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) This guide shows how to reset the low tire pressure warning message on the Mercedes A-Class. The light activates whenever you perform any operation o…
How to Reset the Tire Light on a Mercedes-Benz A-Class W169
How to Reset the Tire Light on a Mercedes-Benz A-Class W169
Mercedes Classe A (2004-2012 / W169) .. cluster display of your Mercedes-Benz A-Class W169, follow this guide and implement the steps described. First, insert the key and turn it to.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos