Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Warning Light on the Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Tire pressure warning light

This guide shows how to reset the low tire pressure warning message on the Mercedes A-Class. The light activates whenever you perform any operation on the tires. To begin the reset, turn on the ignition and start the engine. Press the "+" button on the right side of the steering wheel controls, and the message "Tire press OK now?" will appear on the dashboard display; at this point, pressing the "+" button again will reset the warning light. Note that every time you inflate the tires, deflate them, or change them, the warning light will activate. Always check the correct tire pressure.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Tire Pressure Light on Mercedes A-Class
Reset the Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. reset the tire pressure light on the Mercedes A-Class; before resetting the TPMS sensors, it is necessary for all four tires to be at the operating pressure... …
How to Reset the Tire Pressure Light on a Mercedes A-Class
How to Reset the Tire Pressure Light on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. the tire pressure light on a Mercedes A-Class. First, get into the vehicle and turn on the ignition. Next, navigate through the onboard computer.. …
Reset the Tire Pressure Light on Mercedes A-Class
Reset the Tire Pressure Light on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. to reset the tire pressure light on a Mercedes A-Class. First, take your vehicle to a tire shop to check the condition of the tires and their pressure... …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos