Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to remove a light bulb on a Mercedes B-Class headlight

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Light bulb
Operation: How to remove a light bulb on a Mercedes B-Class headlight

How to remove / install a bulb on a headlight of your Mercedes B-Class? Let's see immediately in this video how to do it in the best way. We open the hood of the engine compartment and put it in safety, with a plastic or metal lever we remove the plastic inspection cap that covers the rear of the headlight. We pull the power supply terminals out of their housing and remove the damaged bulbs. We connect the new bulbs to the light clamps of the headlight and close the compartment with the inspection cap. Finally, we check the correct functioning of the lights, always remembering to mount approved bulbs.


Posted on 7 October 2023 by ScegliAuto



How to replace the headlight bulb Mercedes B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) The replacement of the dipped beam light bulb (H7 socket) of the left front headlight (driver's side) of the Mercedes B-Class W245 is really very sim
Mercedes B-Class W245 headlight bulb replacement
Mercedes Classe B (2005-2011 / MK 1, W245) Let's see the procedure necessary for the disassembly and replacement of the headlight bulb of the Mercedes B-Class W245, first series. First we open
How to replace the rear headlight bulb of a Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) To replace the rear headlight bulb on a Mercedes B-Class, start by opening the rear hatch. Then, you will need to remove the access panel by unscrewi

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos