Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level

Model: Mercedes Classe S MK 4, W220 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

The following steps will show you how to check the engine oil level in the Mercedes S-Class. First, get inside the vehicle and turn on the ignition; then press the down arrow button located on the left side of the steering wheel and navigate to the engine oil level check option, performing the check as illustrated in the video.

If an anomaly is reported regarding the oil level, it will be necessary to top off or replace the engine oil (until reaching the maximum level mark).


Updated on 2 November 2026 by ScegliAuto


Related tutorials

Engine Oil Level Check Instructions
Engine Oil Level Check Instructions
Mercedes Classe S (1991-1998 / W140, MK 3) All engines are equipped with a dipstick that allows you to check the engine oil level. At the end of the dipstick, there is a level indicator betwee…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Mercedes Classe S (1991-1998 / W140, MK 3) Once you lift the vehicle on the lift, remove the drain plug from the oil pan located at the left rear corner (when facing the front); after draining…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mercedes Classe S (1999-2005 / MK 4, W220) Lift the vehicle on a hydraulic lift or use a jack and place jack stands under the appropriate supports (rectangular pads) located under the vehicle'…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos