|
Do it yourself
| |||
| ||||
Engine Oil and Oil Filter Replacement
Model: Mercedes Classe S
MK 4, W220
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Lift the vehicle on a hydraulic lift or use a jack and place jack stands under the appropriate supports (rectangular pads) located under the vehicle's frame. Remove the screws securing the splash shield and then remove the splash shield itself. Locate the oil drain plug (it is positioned on the side) and, after placing a suitable container (about 2.6 qt) under the plug, remove the plug to allow the old oil to drain: once drained, reinstall the plug and tighten to a torque of 22 lb-ft. At this point, open the hood and locate the oil filter container cap (cartridge filter): it is near the oil filler cap. Remove the filter container cap using the appropriate wrench (or a metal strap wrench) and extract the old cartridge; replace the 3 O-ring seals (included with the new filter), install the new filter cartridge, and reassemble. Finally, fill the engine with new oil according to the SAE specifications (0W-40) and the quantity (about 9 qt) indicated in the owner's manual. Start the engine for a few minutes and then check the oil level using the dipstick.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe S
(1991-1998 /
W140, MK 3)
Once you lift the vehicle on the lift, remove the drain plug from the oil pan located at the left rear corner (when facing the front); after draining…
Mercedes Classe S
(1999-2005 /
MK 4, W220)
The following steps will show you how to check the engine oil level in the Mercedes S-Class. First, get inside the vehicle and turn on the ignition; …
Mercedes Classe S
(1999-2005 /
MK 4, W220)
To replace the oil pump on the Mercedes S-Class, lift the car so you can unscrew the screws that secure the oil pan at the bottom of the engine compa…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.071
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |