Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on the Mercedes-Benz C-Class?

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Mercedes-Benz C-Class, insert the key into the ignition switch and turn it to the on position: once the instrument cluster is on, quickly press the 0 button located below the instrument cluster twice in a row, which should then turn off. Then, press and hold the 0 button and turn the ignition back on: you will notice that after about ten seconds, the Service light will disappear from the instrument cluster, which can now be turned off completely.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the ON position to activate the instrument cluster. Then, press and hold the OK.. …
Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the "On" position to activate the instrument cluster. Then, press and hold the.. …
Mercedes Classe C (2007-2013 / W204) .. On the Mercedes C-Class, reset the Service light by turning the key to the "On" position. Then, press and hold the OK button.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos