Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Service warning light

In order to reset the tire pressure warning light on the Mercedes GLC, you need to inflate the tires to the recommended pressure value: this value can be found on the sticker attached to the driver's side door frame. Once the inflation is done, you need to navigate through the menu on the instrument cluster to select the "Service" and then "Tyre pressure" options: by holding down the OK button, you can make the warning light disappear from the cluster so that you can then turn off the cluster permanently.

Posted on 5 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this new guide aimed at all of you who own a first series Mercedes GLC, we will explain how you can manually reset the tire pressure warning light…
Resetting the TPMS warning light on the Mercedes GLC
Resetting the TPMS warning light on the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) The following steps will show us the step-by-step instructions on how to reset the tire pressure warning light on the Mercedes GLC; before performing…
How to reset the tire pressure indicator on the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this short video tutorial, it is illustrated how to reset the maintenance light on the Mercedes GLC. The procedure is simple and requires little t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos