Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the light switch in the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013

In this guide we will see the instructions that will allow us to disassemble and replace the light switch or turn signal switch of the Mercedes C-Class. First of all, we get on board the car and start removing the plastic cover located around the turn signal switch; we lever on the side of it to detach and remove it, disconnecting the electrical connector to remove it, as shown in the video. At this point we carry out the repair or directly replace the turn signal switch with the new one, making the electrical connection and checking its operation!

Posted on 5 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Switch in a Mercedes C-Class?
How to Replace the Headlight Switch in a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To replace the headlight switch in a Mercedes C-Class, use a tool to pry off the panel on the left side of the dashboard. Once this panel is removed,.. …
Replacing the Headlight Switch on the Mercedes-Benz C-Class
Replacing the Headlight Switch on the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the headlight switch on the Mercedes-Benz C-Class. First, get into the driver's seat and start by removing the plastic side cover of the dashboard.. …
How to Remove the Light Switch from a Mercedes C-Class
How to Remove the Light Switch from a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. sit in the driver's seat of your Mercedes C-Class. Start by rotating the light switch to "P". Once done, pull the switch towards you to partially.. …

    Frequently Asked Questions

    • Classe C 2021-2028 - Why isn't the car radio working in a Mercedes C-Class? Read answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class W204 B service cost? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos