Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Switch on the Mercedes-Benz C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, you will see instructions on how to remove and replace the headlight switch on the Mercedes-Benz C-Class. First, get into the driver's seat and start by removing the plastic side cover of the dashboard near the turn signal stalk; then unclip and remove the headlight switch by disconnecting the electrical connector at the back, as shown in the video.

At this point, perform the repair on the turn signal stalk, replacing it with a new one if necessary, and apply the reverse procedure for reassembly!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Light Switch on a Mercedes C-Class?
How to Replace the Light Switch on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To replace the light switch on a Mercedes C-Class, grasp the knob and pull it outward to remove the circular cover around it. Once the cover is removed,.. …
Disassembly of the light switch in the Mercedes C-Class
Disassembly of the light switch in the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. switch or turn signal switch of the Mercedes C-Class. First of all, we get on board the car and start removing the plastic cover located around the.. …
How to Replace the Headlight Switch on a Mercedes-Benz C-Class?
How to Replace the Headlight Switch on a Mercedes-Benz C-Class?
Mercedes Classe C (2000-2007 / W203) .. To replace the headlight switch on a Mercedes-Benz C-Class, open the corresponding door to access the side of the dashboard near the switch. Remove.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos