Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light in the Mercedes C-Class?

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in the Mercedes C-Class, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. Start by entering the cabin, then insert the key and turn on the instrument cluster.

Next, reach the mileage related to the service using the "0" button located to the left of the dashboard, turn off the ignition, and turn it back on while holding down the same button, releasing it only after hearing a beep.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. To reset the service light on a Mercedes-Benz C-Class, follow these steps: Turn on the vehicle and ensure all doors are closed. Access the main menu.. …
Mercedes Classe C (2014-2021 / W205) .. of the engine oil change on the Mercedes C-Class. First, get inside the vehicle and turn on the ignition by pressing the start button. Next, press.. …
Mercedes Classe C (2014-2021 / W205) .. to reset the service light on a Mercedes C-Class. First, get inside the vehicle and turn on the ignition; then press and hold the "ok" button and.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos