Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service Light on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the oil service light on a Mercedes-Benz C-Class, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. Start by entering the cabin, then insert the key and turn it to the first position.

Next, press the left button on the dashboard three times in a row, turn on the ignition, and using the directional arrows, navigate to the service screen. At this point, press the left button again, select the oil grade used, and hold the button for 3 seconds.


Updated on 12 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. routine maintenance oil change on the Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition. Then, press and hold the "OK" button.. …
Mercedes Classe C (2000-2007 / W203) .. sit in the driver's seat of your Mercedes C-Class. Begin by activating the instrument cluster by turning the key in the ignition switch. Next, repeatedly.. …
Mercedes Classe C (2014-2021 / W205) .. the tire pressure warning on the Mercedes C-Class. Before resetting the TPMS sensors, ensure that all four tires are at the proper operating pressure... …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos