Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Door Panel

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
This video is currently unavailable

Remove the speaker cover on the mount using a plastic tool by prying at the edges and disconnect the connector. Remove the side cover and disconnect the electrical connector.

Remove the cover under the handle and unscrew the two retaining screws with a Torx wrench. Remove the plastic clips of the panel with the help of a spatula and gently pull the panel along the edges, lifting it carefully upwards.

Disconnect the handle cables and electrical contacts by unplugging the connectors, taking care not to tear them. Reinstall the new panel starting with the connection of the electrical cables.

Position the panel upwards and then push it down until it clicks into place. Reconnect the cables, connectors, and screws.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Mercedes E-Class
How to Remove the Front Door Panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Briefly review the procedure to remove the front door panel of the Mercedes E-Class. First, open the front door of the vehicle and start by removing …
Removing the Door Panel of the Mercedes E-Class W210
Removing the Door Panel of the Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) Today, follow these simple and quick steps to remove the front door panel of the Mercedes E-Class W210. First, open the front door and start removing…
How to replace the front door speaker of the Mercedes E-Class
How to replace the front door speaker of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) In this guide, we will see the useful information for disassembling and replacing the front door speaker of the Mercedes E-Class. First, we open the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos