Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Mercedes A-Class?

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Service warning light

To make the Service light disappear completely from the instrument panel of the Mercedes Class A, you will need to press and hold the 0.000 button located on the left side of the panel while it is turned off. By continuing to hold it down, you can insert the ignition key into the corresponding slot and turn it to start the panel. Once the panel is activated, you can wait a few seconds with the button still pressed until the light disappears; at the end of the reset, you can release the button.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Mercedes A-Class?
How do you reset the Service light on the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. to reset the Service light on the Mercedes A-Class, you need to turn on the instrument panel and navigate through the menu using the directional arrows.. …
How to Reset the Service Light on a Mercedes A-Class?
How to Reset the Service Light on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To reset the Service light on the Mercedes A-Class, turn on the ignition and navigate through the menu using the directional arrows on the steering.. …
How do you reset the Service indicator light on the Mercedes A-Class?
How do you reset the Service indicator light on the Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. To reset the Service light on the Mercedes Classe A, you need to press and hold the SET button located on the left side of the dashboard next to.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos