Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Hood of a Mercedes C-Class W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Body

See other generations:
Video tutorial

Opening and closing the hood is very important because you often need to find the latch under the edge of the hood to disengage the safety catches. At the same time, it is essential to ensure that the catches are properly engaged when closing to avoid accidental openings.

To start, pull the lever located inside the cabin on the driver's side, just below the dashboard: this disengages the first stage of the catches, and a plastic tab shaped like an anchor will pop out from the front grille. Pull this tab to fully release the catches and allow the hood to lift.

During the closing phase, make sure the catches engage correctly.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. to remove the intake manifolds from a Mercedes C-Class W203 Diesel. First, open the hood of the car and remove the engine protection covers. Next, remove.. …
Mercedes Classe C (2000-2007 / W203) In this video, you will see how to remove and then reinstall the Mercedes star from the hood of a W203 Class C. First, open the hood. You will need t…
Mercedes Classe C (2000-2007 / W203) .. port located inside the cabin of your Mercedes C-Class W203 in just a few seconds. First of all, you need to completely turn off the car so that you can.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos