Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel trim in the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door trim panel

Video tutorial
Detailed instructions - The decision to remove the door panel, as in this case, can have several possible reasons, such as repairing the window mechanism, cleaning the panel, replacing the lock, and so on. An essential tool is the plastic panel removal tool, as with this tool you start by unhooking the plastic panel of the door, near the window, from which you will access the first clip to remove. Then you do the same with the inner panel of the external rearview mirror and finally unscrew the screws at the bottom of the panel. All that's left is to grab and pull the panel to detach it from the door, remembering to disconnect the rear electrical connectors.

Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Remove the Door Lock from a Mercedes C-Class
How to Remove the Door Lock from a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the lock mounted in the door of a Mercedes C-Class (left side). Before starting the disassembly, disconnect the battery terminals in the engine compartment... …
How to Remove the Door Panel of a Mercedes C200 W205
How to Remove the Door Panel of a Mercedes C200 W205
Mercedes Classe C (2014-2021 / W205) .. How to remove the door panel on the Mercedes C-Class. Fully lower the window and remove the key. Under the armrest of the door panel, there are two.. …
How to Remove the Rear Door Panel of the Mercedes C-Class
How to Remove the Rear Door Panel of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. to remove the rear door panel of the Mercedes C-Class. First, open the rear door of the vehicle and start unscrewing all the mounting screws located.. …

How to Adjust the Handbrake on a BMW 1 Series?

To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel.

Watch the video!


by ScegliAuto

More videos