Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the PCS Light in a Toyota?

Model: Toyota Toyota Various
Part: Warning light – error code

Video tutorial

In Toyota vehicles, the PCS light indicates a malfunction in the pre-collision system, which is responsible for stopping the vehicle in an emergency. Once the issue is resolved, or in case of a false alarm, you can manually remove the light by following the simple procedure shown in this tutorial.

First, enter the cabin, then insert the key and turn on the ignition. Next, press the brake pedal, activate the cruise control, and press the "+ RES" button three times in succession.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How does the Toyota PCS system work?
How does the Toyota PCS system work?
Toyota Toyota Various The Pre-Collision System (PCS) is an advanced safety system designed to help prevent or mitigate road accidents. It uses a combination of sensors, su…
How do you reset the AdBlue warning light on the Toyota Prado?
How do you reset the AdBlue warning light on the Toyota Prado?
Toyota Toyota Various In order to reset the AdBlue warning light of the Toyota Prado, you need to perform a refill by adding the necessary amount of additional fluid into …
How to Remove the Door Lock from a Toyota
Toyota Toyota Various Removing the lock from a 2012 Toyota IRS, model 4K, is a very simple operation that can be done independently in a few minutes. The first step is to …

    Frequently Asked Questions

    • Toyota Vari - Why did the "AFS OFF" light come on in the Toyota Harrier? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos