Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a Toyota Remote

Model: Toyota Toyota Various
Part: Key

Video tutorial

To complete the programming operation, a working master key is required. Keep the driver's door open: insert and remove the master key twice in the ignition, close and open the driver's door twice.

Insert and remove the master key once, close and open the driver's door for another two times: insert the master key and leave it in the ignition, then close the door. Now turn the key to ON and then OFF. Remove the key. At this point, the car is in programming mode (it should have emitted a beep or have flashing lights).

Press "lock" and "unlock" on the new remote simultaneously for a couple of seconds (it may take 2/3 attempts). When successful, you will hear a "click" and see the lights flashing.

Hold "unlock" to confirm.


Posted on 15 March 2026 by ScegliAuto


Related tutorials

How to Change the Battery in My Toyota Remote Key?
How to Change the Battery in My Toyota Remote Key?
Toyota Toyota Various If you need to replace the battery in your Toyota key remote, this video will show you how. First, take your remote and press the button to release t…
How to replace the battery of the Toyota remote control
Toyota Toyota Various Today's video tutorial will explain how to replace the battery of Toyota vehicle remote controls by yourself. To perform this operation, we need to o…
How to Replace the Remote Battery on a Toyota Vitz?
How to Replace the Remote Battery on a Toyota Vitz?
Toyota Toyota Various As seen in this tutorial, replacing the remote battery on a Toyota Vitz is an extremely simple and quick operation. You will need a replacement CR163…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos