Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Toyota Prado?

Model: Toyota Toyota Various
Part: AdBlue warning light

In order to reset the AdBlue warning light of the Toyota Prado, you need to perform a refill by adding the necessary amount of additional fluid into the appropriate tank: to do this, you will need to open the hood, so that you can access the components located inside the engine compartment. The blue cap will be located in the top right part of the compartment and can be removed to add the necessary amount of fluid into the tank; after refilling, you can close the cap to check if the warning light has disappeared.

Posted on 24 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Trip Meter on a Toyota Prado
Toyota Toyota Various To reset the Trip B meter on the dashboard of your Toyota Prado, follow these steps. The entire operation takes just a few seconds to complete. First…
How to Reset the Trip Meter on a Toyota Prado?
How to Reset the Trip Meter on a Toyota Prado?
Toyota Toyota Various To reset the trip meter on a Toyota Prado, insert the ignition key into the corresponding lock to turn on the dashboard: once activated, locate the O…
How to reset the AdBlue warning light on the Toyota
How to reset the AdBlue warning light on the Toyota
Toyota Toyota Various The AdBlue warning light on diesel vehicles activates when the level of fluid in the tank is below the required level. To reset the warning light, yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos