Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Trip Meter on a Toyota Prado

Model: Toyota Toyota Various
Part: Warning light – error code

To reset the Trip B meter on the dashboard of your Toyota Prado, follow these steps. The entire operation takes just a few seconds to complete. First, insert the key and start the ignition if you haven't done so already. Next, locate the button below the speedometer and press it multiple times until "Trip B" appears on the display. At this point, press and hold the same button and release it once the reset is successfully completed.

Updated on 2 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Toyota Various To reset the trip meter on a Toyota Prado, insert the ignition key into the corresponding lock to turn on the dashboard: once activated, locate the O…
Toyota Toyota Various In order to reset the AdBlue warning light of the Toyota Prado, you need to perform a refill by adding the necessary amount of additional fluid into …
Toyota Toyota Various It will be possible to deactivate the parking sensors of the Toyota Prado by turning on the instrument panel, inserting the ignition key into the cor…

Other guides you may be interested in

    Frequently Asked Questions

    • Toyota Vari - Why did the "AFS OFF" light come on in the Toyota Harrier? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos