Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Eco Mode on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Instrument cluster

Let's see how to disable "Eco" mode on a Peugeot 206. Go to the battery compartment, disconnect the positive terminal, and count to 60. Now reconnect the positive terminal and return to the vehicle's interior. Turn the key to switch on the ignition without starting the engine. Count to 60 again, then turn off the ignition. Now count to three. Turn the key again to switch on the ignition, and count to 60 once more. Repeat this procedure five times in total. On the sixth time, start the engine for 1 minute. Turn it off and you will notice that Eco mode no longer appears.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the ECO mode of the Peugeot 206?
How do you deactivate the ECO mode of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To deactivate the ECO mode on the Peugeot 206, there is no procedure that must be done through the central dashboard display: to deactivate this mode…
How to deactivate the ECO mode of the Peugeot 206
How to deactivate the ECO mode of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The ECO mode on a Peugeot 206 vehicle is activated when the vehicle's battery does not allow for excessive current dispersion or usage inside the veh…
How do you deactivate the Eco Mode on the Peugeot 206?
How do you deactivate the Eco Mode on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To deactivate the Eco Mode of the Peugeot 206, you need to open the hood in order to have access to the components located inside the engine compartm…

Other guides you may be interested in

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos