Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the ashtray of the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the ashtray of the Mercedes C-Class. First of all, we get on board the car and start disassembling and removing the cover of the gear lever boot; then we unscrew the fixing screws that we find underneath, as shown in the video.

At this point, we disconnect the electrical connector of the ashtray, located underneath, in order to remove it and replace it if necessary with a new one; then we reassemble the console components and finally the gear lever boot, reassembling everything!


Posted on 31 May 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. remove and replace the ashtray in the Mercedes C-Class. First, get inside the vehicle and start by removing the shift knob cover, prying off the cover.. …
Mercedes Classe C (2007-2013 / W204) .. from the center console in the Mercedes C-Class, a very simple operation. To do this, you will need a plastic trim tool and a Torx T20 wrench... …
Mercedes Classe C (2007-2013 / W204) .. and replace the entire ashtray on the Mercedes C-Class W204 in simple steps. First, get inside the vehicle and start by removing the cover of the gear.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos