|
Do it yourself
| |||
| ||||
Replacing Front Headlight Bulb with Night Breaker Plus Model
Model: Mercedes Classe C
W202
- Years:
1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Video tutorial
Open the hood and ensure it is securely supported. Release the retaining clips of the headlight protective cover and remove it, being careful not to damage the gasket: you will see the three bulbs (fog light H3, low beam H1, and high beam H1). Next, release the retaining clip of the low beam bulb and pull it out of the socket, disconnecting the connector attached to it, avoiding touching the bulb with your fingers. Insert the new bulb into the socket (the insertion position is fixed), secure the clip and the corresponding locking mechanism. Proceed in the same manner to replace the high beam bulb (also H1 type) and reposition the protective cover. Repeat the operation on the other headlight.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
In today’s video, you will see how to remove the front headlight of a Mercedes C-Class W205. First, disconnect the front bumper, at least on the side…
Mercedes Classe C
(1993-2000 /
W202)
The instrument cluster of the vehicle in question is simply clipped into the dashboard: to remove it, just pull it forward.
To do this, it is suggest…
Mercedes Classe C
(1993-2000 /
W202)
Today, we will show you the locations of the fuse boxes on a Mercedes-Benz C-Class Model W202. The first fuse box is located in the engine compartmen…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |